Skip to main content

Vapes Direct

Vaping Guides

Pyne Pod Click 50K Guide: Pods, Power Modes and Refills

Pyne Pod Click 50K Pre-Filled Kit

The Pyne Pod Click 50K is one of the most talked about pre-filled pod kits in the UK. It combines a rechargeable battery with sealed pods that top themselves up from a built-in reservoir, so you get a long-lasting, low-effort vape with no bottles to fill. This guide explains how the system works, what comes in the box, how the two power modes differ, which refill pods to buy and how to get the most from every pod.

Pyne Pod Click 50K pre-filled kit
Pyne Pod Click 50K Pre-Filled Kit

Pyne Pod Click 50K at a glance

  • Battery: 750mAh, rechargeable via USB-C
  • Power modes: Regular (10W) and Boost (20W)
  • Pod system: 2ml pre-filled pod plus a 10ml auto-refill container
  • In the starter kit: three pods and three 10ml containers, 36ml of e-liquid in total
  • Nicotine: 20mg nic salt
  • Kit flavours we stock: 27
  • Refill pod flavours we stock: 48
  • Price: starter kit £12.99, refill pods £4.99

How does the Pyne Pod Click work?

The clever part of the Pyne Pod Click is its two-part pod. Each pod has a small 2ml chamber that feeds the coil, attached to a 10ml container of the same e-liquid. As you vape, the 2ml chamber is topped up automatically from the container. You never open a bottle or fill anything by hand, but you get far more vaping from each pod than a standard 2ml pre-filled pod would give.

This design keeps the device within UK TPD rules, which limit vape tanks to 2ml, while still offering a long life per pod. It is the same idea used by several popular kits, and our guide to the best pre-filled pod kits compares it with similar systems.

What is in the starter kit?

The Pyne Pod Click 50K starter kit includes the rechargeable battery device plus three pre-filled pods, each with its own 10ml container. That adds up to 36ml of 20mg nic salt e-liquid. Because the kit already includes three pods, you have plenty to get started before you need to buy refills. The kit is available in 27 flavour editions, including Apple, Banana, Berry, Blackberry, Blackcurrant, Blue, Red, Grape, Guava and Green Editions.

Regular mode vs Boost mode

The Pyne Pod Click has two power settings, and switching between them is one of its most useful features.

Regular mode (10W)

Regular mode runs at 10W. It gives a balanced, smooth vape and is the more efficient setting, so your battery and e-liquid last longer. Most people use Regular mode for everyday vaping.

Boost mode (20W)

Boost mode doubles the power to 20W for a warmer vape with more intense flavour and more vapour. It uses e-liquid and battery faster, so it is best used when you want a stronger, fuller taste rather than all day.

If your pod ever starts to taste dry or burnt in Boost mode, switch back to Regular. Running at higher power can outpace how quickly the wick soaks, especially with sweeter flavours.

Charging and battery life

The 750mAh battery charges through a USB-C port, the same type of cable used by most modern phones. Battery life depends on how often you vape and which mode you use. Regular mode will always last longer than Boost mode. A good habit is to top the battery up when it is low rather than letting it run completely flat, which helps keep it healthy over time. Our vape battery charging tips cover safe charging in more detail.

Choosing refill pods

When your starter pods run out, you only need Pyne Pod Click refill pods. Each refill pack pairs a 2ml pre-filled pod with a 10ml auto-refill container, just like the pods in the starter kit, and offers up to 10,000 puffs according to the manufacturer. We stock 48 refill flavours, which is a wider choice than the starter kit itself.

Pyne Pod Click prefilled refill pods
Pyne Pod Click Prefilled Refill Pods

Refill flavours include Apple Peach, Banana Ice, Banana Melon and Blackberry Blackcurrant, with many more fruit, ice and sweet blends in the full list. Because you can switch pods whenever you like, it is easy to keep two or three flavours on the go and rotate them.

Is the Pyne Pod Click right for you?

The Pyne Pod Click suits people who want convenience above all else. There is nothing to fill, no coils to change and no bottles to carry, but unlike a single-use device you keep the battery and only replace the pods. It is a good fit if you:

  • are moving away from single-use vapes and want something similar but rechargeable
  • prefer 20mg nic salt
  • want long-lasting pods without refilling
  • like having two power settings to choose from

If you would rather pick your own e-liquid and strength, a refillable pod kit may suit you better. Our pre-filled vs refillable guide lays out the pros and cons of each.

Pyne Pod Click vs other pre-filled kits

We stock several kits that use a similar pod-plus-container design:

  • Dojo Blast 10K: by Vaporesso, with a 2ml pod and 8ml container and a 1000mAh battery.
  • Pixl 8000: a 2ml pod with a 10ml container, up to 8,000 puffs per pod.
  • IVG 2 Pro: a 2ml pod and 10ml container, up to 10,000 puffs per setup.

The Pyne Pod Click stands out for its two power modes and the three pods included in the starter kit. Read our Pixl 8000 guide and IVG Pro refill guide for more on the alternatives.

Setting up your Pyne Pod Click for the first time

  1. Charge the device. Plug it in with a USB-C cable and let it charge fully before first use.
  2. Click the pod into the device. It should sit firmly in place. If it feels loose, remove it and push it back in straight.
  3. Wait a few minutes. Give the coil time to soak before your first puff, especially with a brand new pod.
  4. Start in Regular mode. Get used to the vape at 10W, then try Boost mode once the pod is fully primed.

Troubleshooting common problems

The pod tastes burnt

A burnt taste usually means the coil is not getting enough liquid. Switch to Regular mode, take slower puffs and leave a few seconds between them. If the taste stays burnt after that, the pod may be near the end of its life. Our article on why a vape tastes burnt explains the common causes.

The device does not fire

Check the battery is charged and the pod is clicked in fully. Wipe the gold contacts on the bottom of the pod and inside the device with a dry tissue, since a little condensation can stop the connection.

There is liquid in the mouthpiece

A small amount of condensation is normal. Remove the pod, tap it gently on a tissue and wipe the mouthpiece. Taking softer, longer puffs reduces how much liquid gets pulled through.

The flavour has gone flat

If the pod still has e-liquid but tastes weak, the coil has probably worn out. Fit a new refill pod. If a new pod tastes weak too, your taste may simply be used to the flavour, so try a different one for a day.

Recycling used pods

Used pods contain a small coil and traces of e-liquid, so they should not go in your household recycling bin. Many vape shops and recycling points accept used vape pods. The battery device should be recycled as electrical waste at the end of its life, never thrown in general rubbish, because lithium batteries can cause fires in bin lorries and waste sites. Keeping the battery and only replacing pods already cuts waste compared with single-use devices.

Our verdict

The Pyne Pod Click 50K is one of the easiest ways to vape without refilling bottles. The pod and container design gives long life per pod, the two power modes add flexibility that most pre-filled kits lack, and the starter kit includes three pods so you are not reordering straight away. If you want simple, long-lasting 20mg nic salt vaping with a rechargeable device, it is an easy kit to recommend.

Frequently asked questions

Do I need to refill the Pyne Pod Click?

No. The pods are sealed and pre-filled. Each one tops itself up from its own 10ml container, and you replace the whole pod when it runs out.

What nicotine strength is it?

The Pyne Pod Click uses 20mg nic salt e-liquid.

How do I charge it?

Use a USB-C cable. The device has a 750mAh rechargeable battery.

Is it TPD compliant?

Yes. Each pod has a 2ml chamber, and the 10ml container design keeps it within UK TPD rules.

What is the difference between Regular and Boost mode?

Regular mode runs at 10W for a smooth, efficient vape. Boost mode runs at 20W for more flavour and vapour, but uses battery and liquid faster.

Buy the Pyne Pod Click 50K

Get started with the Pyne Pod Click 50K starter kit or stock up on Pyne refill pods. Browse all pre-filled pod kits and prefilled pods for more options. We dispatch seven days a week with free UK delivery on orders over £20. All products are for adults aged 18 and over. Vaping products contain nicotine, which is an addictive substance.

Leave a Reply

Your email address will not be published. Required fields are marked *

Search