Vaporesso’s Luxe kits are some of the most popular pod devices in the UK, but they come in two separate families, Luxe X and Luxe Q, and their pods are not interchangeable. If you have searched for “Luxe X Corex 2 pods” or “Luxe Q pods” and are not sure which ones you need, this guide explains which pods fit which kit, what every resistance does, how to fill them, and how to make them last.
Luxe X vs Luxe Q pods at a glance
| Luxe X COREX 2.0 pods | Luxe Q / QS pods | |
|---|---|---|
| Price | £6.49 for 2 | £9.99 for 4 |
| Fits | Luxe X, Luxe XR, Luxe X Pro, Luxe XR Max | Luxe Q, Luxe Q2, Luxe Q2 SE, Luxe QS |
| Capacity | 2ml | 2ml |
| Fill | Bottom fill, silicone stopper | Top fill, remove the mouthpiece |
| Resistances | 0.3, 0.4, 0.6, 0.8 ohm | 0.6, 0.8, 1.0, 1.2 ohm |
| Style | From big-cloud DTL to MTL | MTL and restricted DTL |
The key rule: Luxe X pods fit the Luxe X family only, and Luxe Q pods fit the Luxe Q family only. Check the name of your kit before you order.
Vaporesso Luxe X COREX 2.0 pods
The Luxe X COREX 2.0 Replacement Pods are 2ml refillable cartridges for the Luxe X, XR, X Pro and XR Max. Each has an integrated mesh coil, so there are no separate coils to change. Vaporesso says the COREX 2.0 upgrade, with its Morph Mesh structure and COREX cotton, gives better flavour, longer pod life and more vapour than the original pods. SSS leak-resistant technology helps keep the liquid inside the pod.
Luxe X resistances explained
- 0.3 ohm mesh: wide mouthpiece for a free, airy direct-to-lung (DTL) draw. Best with high-VG liquid.
- 0.4 ohm mesh: also made for DTL with a wide mouthpiece and big clouds.
- 0.6 ohm mesh: narrower mouthpiece for a restricted DTL or loose mouth-to-lung (MTL) draw.
- 0.8 ohm mesh: slim, tight mouthpiece for a classic MTL draw. Best with nic salts or 50/50 liquids.
The pods fill from the bottom through a port with a silicone stopper, and the clear body lets you see how much liquid is left.
Vaporesso Luxe Q and QS pods
The Luxe Q and QS Replacement Pods come in a four-pack and fit the Luxe Q, Luxe Q2, Luxe Q2 SE and Luxe QS. They are built for MTL and restricted DTL vaping, with integrated mesh coils and COREX heating, which Vaporesso says lasts up to 50% longer than standard coils. They also use SSS leak-resistant technology.
Luxe Q resistances explained
- 0.6 ohm mesh: restricted DTL with more vapour.
- 0.8 ohm mesh: a balance of flavour and vapour for a smooth restricted DTL draw.
- 1.0 ohm mesh: MTL with strong flavour clarity.
- 1.2 ohm mesh: a tighter MTL draw, the closest to a cigarette.
Luxe Q pods fill from the top: remove the mouthpiece to reach the fill port. A neat extra is that you can change the airflow by turning the pod round 180 degrees in the kit.
Which resistance should you choose?
| You want | Luxe X pod | Luxe Q pod | Liquid |
|---|---|---|---|
| A cigarette-like draw | 0.8 ohm | 1.2 ohm | Nic salt, 10mg to 20mg |
| MTL with lots of flavour | 0.8 ohm | 1.0 ohm | Nic salt or 50/50 |
| A looser restricted DTL draw | 0.6 ohm | 0.6 or 0.8 ohm | 50/50, lower strength |
| Big clouds | 0.3 or 0.4 ohm | Not available | High-VG shortfill, around 3mg |
Read MTL vs DTL Vaping Explained and Nic Salt Strength: 10mg or 20mg? if you are unsure.
How to fill Luxe pods
Luxe X (bottom fill)
- Remove the pod and turn it upside down.
- Open the silicone stopper on the fill port.
- Fill slowly, stopping below the top, then close the stopper firmly.
- Wait about five minutes before vaping a new pod.
Luxe Q (top fill)
- Remove the pod and pull off the mouthpiece.
- Fill through the port, stopping below the top.
- Replace the mouthpiece and wait about five minutes before vaping a new pod.
More tips in our pod filling guide.
What is COREX and why does it matter?
COREX is Vaporesso’s name for its coil heating technology, and it appears across both Luxe families and the XROS range. The idea is that the coil heats more evenly across its surface, so the liquid vaporises consistently instead of some parts running hotter than others. Vaporesso says that gives more accurate flavour and longer pod life. The Luxe X pods use the upgraded COREX 2.0 version, with a reshaped Morph Mesh and new cotton. Whatever the label, the practical rules for long pod life are the same: prime new pods, keep them topped up and do not run them hotter than you need.
Matching liquid to your Luxe pod
Getting the liquid right matters as much as the resistance:
- 0.8 ohm and above (both families): use nic salts or 50/50 liquid. These coils have smaller wicking holes that suit thinner liquid, and higher nicotine strengths stay smooth at their lower power. Try the brands in Best Nic Salts UK.
- 0.6 ohm: 50/50 liquid at a moderate strength works well.
- 0.3 and 0.4 ohm (Luxe X only): use a high-VG 70/30 shortfill at a low strength, around 3mg. These coils make a lot of vapour, so a high-strength nic salt would feel very harsh. See Best Shortfills UK and Doozy E-Liquid Guide.
Making Luxe pods last longer
- Prime every new pod by waiting about five minutes after filling.
- Do not let the pod run dry. The clear body makes it easy to see when to top up.
- Use the lowest power that tastes good. Running hotter burns through cotton faster.
- Pause between puffs, especially on the low-resistance pods.
- Rotate very sweet flavours with lighter ones; sugar builds up on the coil.
For more, read How Long Does a Vape Pod Last? and Why Does My Vape Taste Burnt?
Troubleshooting Luxe pods
Leaking
Check the stopper (Luxe X) or mouthpiece (Luxe Q) is fully closed, avoid overfilling, and take steady draws rather than sharp pulls.
Gurgling
Some liquid has flooded the coil. Remove the pod, wrap it in a tissue and blow gently through it, then take softer draws.
Kit says no pod
Wipe the contacts on the pod and the kit with a dry tissue, then reseat the pod firmly.
Weak flavour on a Luxe Q
Try rotating the pod 180 degrees to change the airflow, and check the pod is not nearly empty.
Should you switch kits?
If you already own a Luxe X or Luxe Q and are happy with it, there is no need to switch: just buy the matching pods. If you are choosing a new kit, consider how easy pods are to find, how you like to vape and how much battery you need. Popular alternatives include the Vaporesso XROS range, the OXVA Xlim range and the Voopoo Argus P3.
Frequently asked questions
Do Luxe X pods fit the Luxe Q?
No. Luxe X pods fit the Luxe X family and Luxe Q pods fit the Luxe Q family. They are not interchangeable.
How many pods are in a pack?
Luxe X COREX 2.0 pods come in packs of two; Luxe Q and QS pods come in packs of four.
How long do Luxe pods last?
Usually one to two weeks for a regular vaper, depending on liquid and power.
Can I replace just the coil?
No. The mesh coil is built into the pod, so you replace the whole pod when it wears out.
Which Luxe X pod is best for nic salts?
The 0.8 ohm pod. Its tight MTL draw and lower power suit 10mg to 20mg nic salts.
Which Luxe Q pod feels most like a cigarette?
The 1.2 ohm pod, which gives the tightest mouth-to-lung draw in the range.
Do Luxe X COREX 2.0 pods fit older Luxe X kits?
They are designed for the Luxe X series: Luxe X, XR, X Pro and XR Max. Check the product page if you have an older or rarer variant.
Why does my new Luxe pod taste burnt?
It was almost certainly vaped before the cotton had soaked. Always wait about five minutes after filling a new pod.
Can I use Luxe pods with shortfills?
Yes. Use 70/30 shortfills in the 0.3 and 0.4 ohm Luxe X pods, and 50/50 shortfills in the higher-resistance pods.
Are Luxe pods TPD compliant?
Yes. Both families hold 2ml, the UK legal maximum.
The bottom line
Luxe X pods fit the Luxe X, XR, X Pro and XR Max, in 0.3 to 0.8 ohm; Luxe Q pods fit the Luxe Q, Q2, Q2 SE and QS, in 0.6 to 1.2 ohm. Match the pod to your kit, pick a resistance for your vaping style, and they will give great flavour. Browse the full Vaporesso range.
Vaping products and nicotine pouches contain nicotine and are for adults aged 18 and over only.